Hydrokapillare - Water Capillary Mats

Capillary mats - energy transfer device in the room

Water capillary mats are the key element of the Hydrokapillare system.

The capillary tubes are made from high quality polypropylene (PP-R) – an environmentally friendly and safe plastic with excellent thermal management and elasticity properties.

Diameter of capillary tubes - 3,4 or 4,3 mm

Basic types of capillary mats:

Type G

A - distance between capillaries - 10/20/30/40/60 mm;

B - main pipes PP-R d20x2mm, PN10 (at both ends of the capillary mat)

L - length of capillary mat.

Data sheets for Type G capillary mats

Type S

A - distance between capillaries - 10/20/40 mm

B - main pipes PP-R d20x2mm, PN10 (at one end of the capillary mat)

L - length of capillary mat.

Data sheets for Type S capillary mats

Technical data

Material:	PP-R (Polypropylene Random Copolymer)
ø Main pipe:	20 x 2 mm
ø Capillary tube:	4.3 x 0.8 mm vai 3.4 x 0.55 mm
Distance between capillaries:	10-20-30-40-60 mm
Length:	Type S: 600 – 7500 mm Type G: 600-15000 mm
Width:	150 – 1000 mm
Spec. exchange surface:	0,72 - 1,05 m² / m² capillary mat surface
Spec. weight:	ca. 190 - 880 g / m² capillary mat surface
Spec. water capacity:	0,2 - 0,57 l / m² capillary mat surface
Spec. total weight:	ca. 390 - 1450 g / m² capillary mat surface (without main pipes)
Colour:	green, light grey (can be tinted, if necessary)
Maximum temperature in the system:	+50° C
Optimal input temperature for heating:	+ 28-32° C
Optimal input temperature for cooling:	+ 16-18 ° C
Optimal pressure in the system:	2-3 bar
Factory test pressure:	20 bar

Additional advantages in safety, maintenance and quality:

Limestone does not occur in water capillary mats; limestone forms at +60°C – the water in the water capillary mat system is at max. +32°C for heating and at max. +18°C for cooling.
Mud does not occur in water capillary mats; mud results from corrosion – the water capillary mat system uses only corrosion-protected components made from PPR, stainless steel, brass or bronze.
Prior to operation, the safety of the water capillary system is verified with air pressure at 20 bar and water pressure at 10 bar; the system is filled only once.
Water capillary mats can be easily repaired; a capillary is cut and both ends are welded – with no effect to the heating/cooling output.
Water capillary mats do not require maintenance and have a safety guarantee of up to 50 years.